En savoir plus
- Type
- Condenser (electret bias)
- Frequency Response
- 20Hz to 20KHz
View Larger- Polar Pattern
- Omnidirectional
- Output Noise (equivalent dBSPL, A-weighted)
- 39.0 dB typical; 42.0 dB maximum
- Signal-to-Noise Ratio
- 55 dB at 94 dB SPL
- Recommended Minimum Input Impedance
- >1 kilohm
- Preamp Output Impedance
- 136 ohms
- Output Level, open circuit, ref. 1v/Pa at 1 kHz
- -50.0 +/- 3.0dB 3.16mV
- Maximum Sound Pressure Level
- 147 dBSPL at 1% THD/1 kilohm load
- Dynamic Range
- 108 dB (max. SPL with 1k load, minus typical A-wt. noise)
- Current Drain
- 4.6 mA (preamp and microphone)
- Output Polarity
- Positive pressure on the diaphragm produces a positive voltage at:
- Pin 2 relative to pin 3 at the output connector of the preamp
- Power Requirements
- Phantom power; 11 to 52 Vdc positive on pins 2 and 3, return on pin 1 (ground)
- Net Weight
- 135.35 g (4.75 oz.) microphone and in-line preamp
- Cable
- 1.5 m (5 ft.), small-diameter, shielded, with mini 4-pin connector (TA4F)
